MagnaClean TwinTech

In central heating systems that have underfloor heating or renewable heating systems using heat pumps, capturing magnetite is one thing but there’s other debris to deal with too. We’ve created MagnaClean TwinTech to handle both. Its high-performance magnet takes care of magnetite, while its fine wire gauze traps non-magnetic and biological films that can build up in these lower temperature systems.

Homeowner Benefits

Installation and Service Instructions

Maintain peak performance
Whether you’re fitting a MagnaClean® TwinTech on a brand new boiler or retrofitting it on an existing boiler, get the installation right to give the boiler the best protection. And to help keep the filter performing as powerfully as the day it was fitted, service it properly. To do both, simply follow our guide.


TECHNICAL PDF

Technicial Specifications

Canister and Lid

Material: Glass fibre reinforced nylon
Fluid capacity: 340 ml (chemical bowl)
Inlet diameter: 22 mm at valve
Outlet diameter: 22 mm at valve
Thread: Pressure thread
Flow configuration: Flow must enter the bottom port and exit the top port

Magnet

Housing: Stainless steel
Length: 150 mm
Diameter: 25 mm

Wire Gauze

Material: Stainless steel
Diameter: Approximately 90 mm

Triple Seal Valve

Body material: Nickel plated brass
Seals material: Long life
PTFE ball seals
O ring material: Nitrile 70
Valve inlet/outlet: 22 mm

Bleed Valve

Body material: Nickel plated brass
Screw: Nickel plated brass
Retainer: Nickel plated brass
Ball: Stainless steel
Spring: Stainless steel
Outer hex: 22 mm

Servicing Clearance

Air vent (top): 50 mm
From magnet cap (bottom): 95 mm

Installer Benefits

https://youtu.be/2Fn5TpyIIPo?si=7_ytjpAVYNx2XZub

MagnaClean TwinTech in Action

Magnetite can build up in untreated central heating systems, making them inefficient, causing cold spots on radiators and even boiler breakdowns. See how our filter works to remove the sludge and keep boilers working their best