MC35
- High performance disinfectant and cleaner
- Removes and mobilizes system contaminants including biofilms pass
- All systems must have a CMX filter installed
- MC1+™ Contains Inhibitor protection – bare when cleaning passivates metal surfaces
- No need to drain or flush the system after treatment
- Helps prevent deposit corrosion
- Price positioned +15% above MC3+ Cleaner
Homeowner Benefits
- Removes sludge, debris and scale
- Restores heating efficiency
- Helps reduce heating and maintenance bills
Dosage Instructions
How to use
With its quick-dose bottle, MC3+ Rapide can be added in just 20 seconds via a radiator, air vent or the boiler filling loop. However, we always recommend dosing via a MagnaClean® filter. MC3+ can be added up to 30 days before a full clean, to better protect the system’s vulnerable metals during the process. Get detailed guidance on the most effective way to cleanse systems.
- Explanatory signs that a system may need cleaning.
- Poor heating or cooling performance unstable flow
- Blocked strainers/filters/piping system
- Large amounts of solids come out of the relief valves
- Excessive pump seal wear
- Blocked plate heat exchangers
- Perforation of pipes and radiators
- Boiler heat exchanger malfunctions
- High levels of bacteria/suspended solids
- AAV and Isolation Valve leak
- MC35 will mobilize all debris within a system, not just magnetite
- If a commercial or DRX filter is installed, new system problems will occur.
- Mobilized scale blocks the boiler/system heat exchangers
- Biofilms affecting other areas of the system will be distributed
- Filter maintenance is key to the MC35 used
- MC1 levels also need to be carefully monitored and maintained.
- Levels should be checked after 7 days
Installer Benefits
- Dosing a system with the MC35 can reveal hidden problems
- Activation of system remnants, under scum cause system leaks as a result of corrosion can
- Speeding up something that will already happen
- Keep customer aware of potential issues
- Things to consider when discussing the MC35 with customers
- How old is the system you are going to treat?
- What is the condition of the piping/plant?
- Signs of corrosion/system leaks/age of facility
- It may be best not to dose a system immediately